Shop White Rodgers Parts

Hot surface furnace igniter kit.
If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Replacement control board for Goodman/Amana part number PCBBF112S.

Replacement control board for Goodman and Amana part number PCBBF132S.

Universal Integrated Ignition Module

Universal Gas Valve, HSI/DSI Single Stage, Slow Opening, Inlet / Outlet Pressure Taps, Plastic Hose Barb (For Connection To ¼ Hose/Flexible Tubing), LP Gas Conversion Kit, Inlet/Outlet Reducer Bushings (1/2 NPT X 3/8 NPT) 100KBTU/Hr (Nat Gas), 24V, 60 Hz, 1/2 X 1/2 NPT, Replaces 36G24-214

Hot Surface Ignitor With 5-1/4" Leads, N Style Mounting Block, Left Tab, Insulation 200°C, Electrical Connection, Molex Side Lock Connector with .092” Male Pins, Replaces R/S 41-408

Silicon Nitride 80V Hot Surface Ignitor, With White Teflon Coated Leads, Terminal Amp Receptacle With .084" Female Socket, Must Be Used With Hot Surface Ignition for Residential Furnaces (Silicon Nitride Replacement Only) Replaces Lennox 768A-4 (41K5601 & LB-109261A)

Universal Nitride igniter upgrade kit

Universal hot surface ignition control

Hot Surface Ignitor With 5-1/2" Leads, A Style Mounting Block, Sealed Combustion, Insulation 200°C, Electrical Connection, Molex Internal Keyed Connector with .093" Male Pins, Includes Gasket, Replaces R/S 41-401

Hot Surface Ignitor With 5-1/4" Leads, M Style Mounting Block, Insulation 200°C, Electrical Connection, Receptacle with .093" Male Pins, Connector with Mounting Adaptor, Replaces R/S 41-404

Hot Surface Ignitor with 5-1/4" Leads, NM Style Mounting Block, right tab, Insulation 200°C, Connector with Brackets, Includes Ceramic Wire Nuts. Replaces R/S 41-414

Universal Gas Valve - *The Manufacture recommends that this part be installed by a licensed contractor.

Hot Surface Ignitor with 11" leads, Y Style Mounting Block, Oblong Base, Insulation 200°C, Stripped Ends, Includes Ceramic Wire Nuts, Includes Gasket. Replaces R/S 41-406

Hot Surface Ignitor Mini With 7.5" (+/- 1") Leads Including Electrical Connector. Replaces R/S 41-603