Shop RCA Range/Stove/Oven Parts

Oven igniter assembly. Short ceramic style igniter with mounting bracket and wire nuts for installation. Amperage range is 3.3 to 3.6. *Connector may need to be cut off and wires spliced to range wiring with porcelain wire nuts.

Light bulb 40 watt 120 volt medium standard base. Used in many refrigerators and ranges.

Oven bake or broil igniter, 2.5 to 3.0 Amp. The igniter draws electrical current through the oven safety valve to open it. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve. (NOTE: This part is very fragile.)

Burner drip bowl (or drip pan) for 8-inch burner. The drip pan sits underneath the heating element to collect drips or spills around the burner.

Burner drip bowl (also called a drip pan) for 6-inch burner. The drip pan sits underneath the heating element to collect drips or spills around the burner.

Appliance light bulbs (2 pack).

-40 Watts
*No longer Frosted

Oven bake element. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.

Washer or dryer selector switch knob with clip in white.

Gas dryer igniter assembly with bracket and wire harness. If the dryer does not heat then the igniter may have burned out. The burned spot is normally visible. Be aware the igniter is very fragile.

6 Inch Chrome Burner Drip Bowl

End cap, oven door handle, black. Be aware that not all range handle endcaps require locating pins. If your model does not have locating pins, you may discard them.

Bumper black

Line fuse 20a 250v

Secondary microwave door switch. Switch contacts are normally open

Range/stove terminal block (receptacle) kit. The surface element plugs onto this receptacle. If the receptacle's contacts are burned out, the surface element will not get power.