Husky Pressure Washer Parts

Pressure washer thermal release valve. This valve will open to prevent excessive heat and pressure buildup in the pump.

Chemical injection kit for pressure washer pump. Be sure to use the lowest pressure nozzle when adding chemicals to the spray.

Trigger handle

Outlet tube

Pressure washer high pressure hose, 25 ft. This hose can be used on pumps that produce up to 3000 PSI.

Pressure washer pump assembly. If the pressure washer is leaking water, the pump may need to be rebuilt or replaced. This pump does not include a new thermal release valve and key. You will need to reuse the old thermal release valve and drive key or purchase new ones.

Inlet tube connector

In-line fuel filter

Axle 13.3 x 101mm

Himore 3100 PSI Vertical Pump, 2.5 gpm. This pump has been improved by the manufacturer and may differ in appearance from the original. The new pump does not require you to add grease or oil. When installing this pump, you must reuse your thermal release valve and drive key or purchase new ones.

Output shaft key

Lock nut, 3/8-16

Plastic chemical siphon tube

Bungee cord & bead assembly

Himore 2200 PSI Vertical Pump. You will need to transfer your thermal release valve or purchase a new one. This pump will not fit Model HU80522. If you have model HU80522 you will need to contact pump manufactuter FAIP.