Shop Estate Washing Machine Parts

Washing machine agitator directional cogs. These parts are also referred to as "dog ears." 4 per package. If the upper section of the agitator isn't turning properly, then these cogs are likely worn and will require replacement.

Affresh® Washing machine cleaner. This cleaner removes and prevents odor-causing residue in all brands of washers. To use, add one tablet to washer with no clothes and select hot water.

- Septic safe
- More effective than bleach.
- Three tablets per package.

Washer drive motor coupler. New style with metal sleeves for added strength. This version replaces all previous motor coupler styles and versions. For direct drive washing machines. Common symptom of failed coupler is washer will fill, not agitate or spin but will drain the water from the tub.

Washing machine agitator repair kit with a medium length cam (there are other kits available for different models). This kit should be used when the top part of the agitator is not moving properly but the bottom part is.

Washing machine clutch assembly with hardware. *Blue spring for regular, large, extra and super capacity washers, green for compact models. A worn clutch often causes a slower spin speed which leaves the clothes soaked after the cycle.

Washing machine suspension spring. If the suspension spring is broken, the washer will be off balance.

Washing machine drain pump. The pump mounts directly to the motor with two clips. If the washer does not drain then the pump could be locked up or a small object may be clogging it. A small leak in front of the washer could be caused by a defective pump.

White touch-up paint. .6 oz.

Spring clip, knob

Transmission (gearbox) for direct-drive washing machines. If the gears inside the transmission are worn out, the washer may not spin.

Washing machine lid switch assembly with wire harness. The lid switch ensures that the washer door is closed while the washer is spinning. If the lid switch is broken, the washer will not spin. If the washer won't spin but will still agitate, the lid switch is likely defective.

Spanner nut wrench for many Whirlpool, Kenmore, General Electric & Maytag inner tub lock (spanner) nuts

Direct drive washer lid switch assembly, If the washing machine does not spin the lid switch may have failed.

Washer agitator bolt with rubber gasket and thread sealant. Head is 7/16 inches in diameter.

Washing machine water inlet valve kit with bracket. A long or slow fill cycle is often due to a restricted water valve. The valve should never be disassembled and cleaned, only replaced.