Shop Admiral Refrigerator Parts

EveryDrop Ice & Water Refrigerator Filter 4 reduces 23 contaminants, including lead and mercury, asbestos, and industrial chemicals. Each filter provides 300 gallons of filtered water and should be changed every 6 months to ensure proper contaminant removal and flow rate. NSF certified.

40 Watt frosted appliance light bulb.

Rear drum support roller kit. This kit contains two drum support rollers. If the drum rollers are worn out, the dryer may not turn properly or may be excessively noisy. Be aware that the drum bearings are self-lubricating; it is not necessary to lubricate them yourself.

Dryer lint screen assembly. Proper air flow is critical to dryer operation so the filter should be cleaned before every load.

Refrigerator icemaker assembly, modular style. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker.

Dryer belt tension idler pulley assembly.When the idler pulley goes bad it will usually make a high pitch squeeling or rattling noise.

Dryer igniter kit. This igniter will replace both round and flat style igniters. The kit includes the bracket, wire nuts and mounting screw. Be aware the igniter is very fragile and should be handled carefully.

Ice maker EZ connect kit with 4 wire 5 terminal straight plug for freezer connection

2 Terminal door switch

Light/Fan switch, 3 terminal

Refrigerator door gasket.42.13" x 16.4 "

White touch-up paint. .6 oz.

8-inch diameter plug-in surface heating element with looped terminal ends. 5 turn. 2600 Watt. If your surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.

Spring clip, knob

25 watt light-bulb for various appliances, 130 volts, small base screw-in. Bulb has been updated and you may need the recommended socket to install this light bulb. Also bulb is no longer blue tint per factory.